Your enquiry list is currently empty!
Your enquiry is our drive
Questions and answers about our products
Is there a topic missing?
Despite our comprehensive wiki, you haven’t found the information you’re looking for? Then don’t hesitate to contact us directly.
Our team will be happy to help you personally – whether it’s specific applications, custom-made products or missing content. Together we will find the right solution.
Screw jacks
- Ball screw drive vs. trapezoidal screw drive: What is the right choice for my application?
- Can screw jacks absorb side loads?
- How are multiple screw jacks mechanically synchronised?
- How are screw jacks installed and aligned?
- How do I calculate the required load capacity and safety factor?
- How do I calculate the service life of a screw jack?
- How do I choose the right screw jack? (Checklist)
- How do I determine drive torque and power?
- What are the critical buckling load and critical speed and how are they calculated?
- What are the decisive advantages of electromechanical drives over hydraulics and pneumatics?
- What does axial play (backlash) mean and how is it minimised?
- What is a ball screw (KGT) and how does it work?
- What is a screw jack and how does it work?
- What is a screw jack system?
- What is a trapezoidal screw drive (TR) and how does it work?
- What is self-locking in screw jacks and when is it important?
- What is the duty cycle (ED) and how does it affect the design?
- What is the efficiency of screw jacks?
- What maintenance intervals must be observed for screw jacks?
- What motor and control options are available?
- Which accessories and safety components are available?
- Which environmental conditions must be taken into account?
- Which lubricant is the right one and how is it applied?
- Are screw jacks available with a ball screw drive?
- Are stainless steel screw jacks available?
- Are there any restrictions on the installation position of ball screw drives?
- Are there differences in the service life of mineral greases?
- Are there screw jacks with a self-locking function?
- Are there screw jacks with an emergency lowering function?
- Are there screw jacks with integrated brakes?
- Are there screw jacks with integrated limit switch monitoring?
- Can a screw jack be used at subzero temperatures?
- Can a screw jack be used in a horizontal position?
- Can I install a screw jack myself?
- Can I occasionally run a screw jack without load?
- How can a screw jack element be protected against vibrations?
- How can a screw jack element be secured against backdriving?
- How can a screw jack system be integrated into manufacturing processes?
- How can a screw jack system be modularly expanded?
- How can a screw jack system be modularly expanded?
- How can a screw jack system be protected against vibrations?
- How can a screw jack system be remotely controlled?
- How can a screw jack system be remotely controlled?
- How can I determine if a screw jack is overloaded?
- How can incorrect spindle force lead to system failure?
- How can multiple screw jack systems be synchronized?
- How can spindle force be positively influenced by lubrication?
- How can the efficiency of a screw jack system be increased?
- How can the spindle of the standing version S be secured against rotation?
- How do I calculate the torque for a screw jack?
- How do I choose the appropriate gear ratio for a screw jack?
- How do I detect wear on my screw jack?
- How do I measure the stroke position of a screw jack?
- How do I prevent corrosion on a screw jack?
- How do I properly set up a screw jack?
- How do I replace a defective screw jack with a new one?
- How do I select the right screw jack for my load?
- How do I set the end stop on a screw jack?
- How do screw jacks work?
- How does a screw jack element work?
- How does spindle force differ between trapezoidal and ball screw drives?
- How does the duty cycle of ball screw drives compare to trapezoidal screw drives?
- How does the screw pitch affect the force of a screw jack?
- How does the spindle force change with different thread pitches?
- How does the spindle pitch affect the performance of a screw jack system?
- How does the spindle pitch affect the screw jack system?
- How does the thread pitch affect the screw jack element?
- How is a screw jack element controlled?
- How is a screw jack element electrically controlled?
- How is a screw jack element protected against dirt?
- How is a screw jack system driven?
- How is a screw jack system electrically controlled?
- How is a screw jack system installed?
- How is a screw jack system integrated into the production chain?
- How is a screw jack system maintained?
- How is a screw jack system protected against overload?
- How is a screw jack system protected against overload?
- How is a spindle head fixed on a screw jack?
- How is synchronization achieved in a screw jack system?
- How is the axial load absorbed in a screw jack element?
- How is the drive torque for lifting systems determined?
- How is the emergency stop implemented in a screw jack system?
- How is the lifting speed in a screw jack system controlled?
- How is the load capacity of a screw jack system calculated?
- How is the position feedback implemented in a screw jack element?
- How is the spindle force calculated in a screw jack?
- How is the trapezoidal screw lubricated in short-stroke applications (S version)?
- How long does a screw jack last under normal use?
- How long is the delivery time for a screw jack?
- How much weight can a screw jack lift?
- In which temperature range can ball screw drives be operated?
- What advantages does a screw jack system offer compared to hydraulic systems?
- What advantages does a screw jack system offer compared to hydraulic systems?
- What are the advantages of a screw jack compared to hydraulics?
- What are the advantages of a screw jack element compared to a hydraulic cylinder?
- What condition monitoring options are available for a screw jack system?
- What control options are available for a screw jack system?
- What design types are available for screw jack systems?
- What diagnostic functions does an intelligent screw jack system offer?
- What duty cycle is permitted for ball screw drives?
- What factors influence the spindle force during vertical lifting?
- What is a screw jack element?
- What is a screw jack system and how does it work?
- What is a screw jack system and how does it work?
- What is a screw jack?
- What is meant by spindle force in mechanical systems?
- What is the difference between a screw jack and a worm screw jack?
- What is the lead accuracy of a ball screw drive?
- What is the lead accuracy of trapezoidal spindles?
- What is the maximum spindle speed for ball screw drives?
- What is the maximum stroke height achievable with a screw jack?
- What is the service life of a screw jack system in continuous operation?
- What is the standard axial clearance of ball screw drives?
- What loads can a screw jack system typically move?
- What maintenance does a screw jack require?
- What maintenance intervals apply to a screw jack element?
- What safety functions does a modern screw jack offer?
- What safety mechanisms are integrated in a screw jack system?
- What should be considered when selecting screw jack accessories?
- What sizes are available for screw jacks?
- What temperature ranges can a screw jack withstand?
- What types of screw jacks are available?
- What warranty is provided for a screw jack?
- When should cleaning and relubrication be carried out in long-life systems?
- Which components are included in a screw jack system?
- Which DIN 103 standard applies to the thread in the screw jack?
- Which lubricants are suitable for a screw jack system?
- Which lubricants are suitable for screw jacks?
- Which materials are used for a screw jack element?
- Which mounting positions are permissible for a screw jack?
- Which protection classes (IP) are available for screw jacks?
- Which protection classes are available for a screw jack system?
- Which safety functions are integrated into a screw jack element?
- Which sensors can be integrated into a screw jack system?
- Which spindle types are used in a screw jack element?
- Which spindle types are used in a screw jack system?
- Which spindle types are used in screw jack systems?
- Which types of drives can be combined with a screw jack?
Electromechanical actuators
- Ball screw drive vs. trapezoidal screw drive: What is the right choice for my application?
- What are the decisive advantages of electromechanical drives over hydraulics and pneumatics?
- What does axial play (backlash) mean and how is it minimised?
- What is a ball screw (KGT) and how does it work?
- What is a trapezoidal screw drive (TR) and how does it work?
- What is an electromechanical actuator?
- What motor and control options are available?
- Are there any restrictions on the installation position of ball screw drives?
- Are there differences in the service life of mineral greases?
- How are electromechanical actuators controlled?
- How are electromechanical actuators integrated into PLC systems?
- How can a screw jack element be protected against vibrations?
- How can a screw jack system be integrated into manufacturing processes?
- How can a screw jack system be modularly expanded?
- How can a screw jack system be modularly expanded?
- How can a screw jack system be remotely controlled?
- How can a screw jack system be remotely controlled?
- How can an electric cylinder be integrated into existing systems?
- How can an electromechanical actuator be combined with sensors?
- How can an electromechanical actuator be integrated into a digital control system?
- How can an electromechanical actuator be integrated into an IoT system?
- How can multiple screw jack systems be synchronized?
- How can spindle force be positively influenced by lubrication?
- How can the accuracy of an electromechanical actuator be increased?
- How can the efficiency of a screw jack system be increased?
- How can the energy consumption of electromechanical actuators be reduced?
- How can the performance of electromechanical actuators be benchmarked?
- How can the safety of electromechanical actuators be increased?
- How do electromechanical actuators differ from pneumatic actuators?
- How do electromechanical actuators work?
- How does an electromechanical actuator with a ball screw work?
- How does an electromechanical actuator with ball screw drive work?
- How does an electromechanical actuator with direct drive work?
- How does an electromechanical actuator work under varying loads?
- How does an electromechanical cylinder with screw drive work?
- How does end position detection work in electromechanical actuators?
- How does fault diagnosis work in electromechanical actuators?
- How does motion profile programming work in electromechanical actuators?
- How does spindle force differ between trapezoidal and ball screw drives?
- How does the duty cycle of ball screw drives compare to trapezoidal screw drives?
- How does the spindle pitch affect the performance of a screw jack system?
- How does the spindle pitch affect the screw jack system?
- How energy-efficient are electromechanical actuators in continuous operation?
- How is a screw jack element controlled?
- How is a screw jack element electrically controlled?
- How is a screw jack system driven?
- How is a screw jack system electrically controlled?
- How is a screw jack system integrated into the production chain?
- How is a screw jack system maintained?
- How is a screw jack system protected against overload?
- How is an electric cylinder calibrated?
- How is an electric cylinder protected against vibrations?
- How is an electromechanical actuator integrated into predictive maintenance?
- How is an electromechanical actuator maintained?
- How is an electromechanical cylinder locked in position?
- How is end position protection implemented in electromechanical actuators?
- How is motion generated in electromechanical actuators?
- How is position feedback provided in electromechanical actuators?
- How is power transmission realized in electromechanical actuators?
- How is synchronization achieved in a screw jack system?
- How is the calibration of an electromechanical actuator performed?
- How is the emergency stop implemented in a screw jack system?
- How is the lifting speed in a screw jack system controlled?
- How is the position of an electric cylinder monitored?
- How is the position of an electromechanical actuator detected in real time?
- How is the repeatability of an electromechanical actuator determined?
- How is the temperature resistance of electromechanical actuators evaluated?
- How is the trapezoidal screw lubricated in short-stroke applications (S version)?
- How long is the service life of electromechanical actuators?
- How to design electromechanical actuators for extreme environments?
- In which temperature range can ball screw drives be operated?
- What advantages does a screw jack system offer compared to hydraulic systems?
- What advantages does a screw jack system offer compared to hydraulic systems?
- What are the advantages of a screw jack element compared to a hydraulic cylinder?
- What condition monitoring options are available for a screw jack system?
- What control options are available for a screw jack system?
- What diagnostic functions does an intelligent screw jack system offer?
- What duty cycle is permitted for ball screw drives?
- What is a screw jack system and how does it work?
- What is a screw jack system and how does it work?
- What is the lead accuracy of a ball screw drive?
- What is the lead accuracy of trapezoidal spindles?
- What is the maximum spindle speed for ball screw drives?
- What is the maximum torque of electromechanical cylinders?
- What is the protection rating of a typical electric cylinder?
- What is the service life of a screw jack system in continuous operation?
- What is the standard axial clearance of ball screw drives?
- What loads can a screw jack system typically move?
- What safety mechanisms are integrated in a screw jack system?
- What should be considered when selecting screw jack accessories?
- When should cleaning and relubrication be carried out in long-life systems?
- Which components are included in a screw jack system?
- Which lubricants are suitable for a screw jack system?
- Which protection classes are available for a screw jack system?
- Which sensors can be integrated into a screw jack system?
- Which spindle types are used in a screw jack system?
- Which spindle types are used in screw jack systems?
Bevel gearboxes
- Bevel Gearboxes in Comparison: Why the ZK Series is engineered beyond the standard
- How do I carry out a lubricant change on the ZIMM ZK bevel gearbox?
- What is a bevel gearbox and where is it used?
- ZK vs. KSZ-H Bevel gearboxes – Technical comparison and application areas
- How are bevel gearboxes equipped with digital diagnostic systems?
- How can a bevel gearbox be combined with planetary stages?
- How can a bevel gearbox be used in explosion-proof environments?
- How can a bevel gearboxes be designed with redundant bearing support?
- How can a bevel gearboxes be integrated into mechatronic systems?
- How can bevel gearboxes be combined with lightweight components?
- How can bevel gearboxes be combined with other gearbox types?
- How can bevel gearboxes be integrated into linear drives?
- How can bevel gearboxes be monitored using sensors?
- How can bevel gearboxes be used in self-locking mechanisms?
- How do I correctly install the breather on the ZIMM ZK bevel gearbox?
- How do I correctly install the oil sight glass on the ZIMM ZK bevel gearbox?
- How do I proceed with troubleshooting on the ZIMM ZK bevel gearbox?
- How does a backlash-free bevel gearbox work in precision applications?
- How does a bevel gearbox differ from a spur gearbox?
- How does a bevel gearbox operate under intermittent duty?
- How does a bevel gearbox with adjustable gear ratio work?
- How does a bevel gearbox with an intermediate gear stage work?
- How does a bevel gearbox with spring-loaded backlash compensation work?
- How does a bevel gearbox work in safety-critical applications?
- How does a bevel gearbox work with reversible rotation?
- How does a multi-stage bevel gearbox work?
- How does axial force compensation work in bevel gearboxes?
- How does backstop functionality work in a bevel gearbox?
- How does thermal decoupling work in bevel gearboxes?
- How is a bevel gearbox integrated into lifting systems?
- How is a bevel gearbox lubricated?
- How is a ZIMM bevel gearbox of the ZK Series designed?
- How is a ZIMM bevel gearbox of the ZK Series selected by calculation for a fan?
- How is power transmitted in a bevel gearbox?
- How is the contact pattern of a bevel gearbox optimized?
- How is the gear backlash adjusted in a bevel gearbox?
- How is the gear ratio of a bevel gearbox calculated?
- How is the operating factor determined when designing a ZIMM bevel gearbox of the ZK Series?
- How much backlash is permissible in a bevel gearbox?
- What is a bevel gearbox and how does it work?
- What is the efficiency of a bevel gearbox?
- What must be observed regarding lubrication of the ZIMM ZK bevel gearbox?
- What types of bevel gearboxes are available?
- Which components are included in a screw jack system?
- Which factors influence the design of a ZIMM bevel gearbox of the ZK Series?
- Which materials are used for a bevel gearbox?
- Which tooth profiles are used in a bevel gearbox?
- Which torques and speeds are calculated when designing a ZIMM bevel gearbox of the ZK Series?
Connection technology
- How do you select the right connecting shaft?
- How do you select the right coupling?
- How is a connecting shaft mounted?
- How is the connecting shaft mounted onto the shaft extensions?
- What are the advantages of metal bellows couplings?
- What functions does an elastomer coupling perform?
- What is a connecting shaft?
- What is a coupling in drive technology?
- What is a drive key connection?
- What is a free of play coupling and when is it used?
- What is the advantage of using split shell couplings when assembling a lifting system?
- What is the difference between a shaft and a coupling?
- What must be considered before mounting couplings and connecting shafts on a screw jack?
- What tightening torques apply to the split shell couplings on connecting shafts?
- What types of couplings are there?
- When is a safety coupling used?
- Which components are included in a screw jack system?
Motor technology
- What motor and control options are available?
- How does a motor flange work?
- How does power transmission via the motor flange work?
- How is the motor correctly mounted on a screw jack?
- What is a motor flange?
- What material requirements apply to motor flanges?
- What role does ATEX protection play in motors?
- What role does the hole pattern play when selecting a suitable motor?
- What should be considered before mounting a motor on a screw jack?
- Which components are included in a screw jack system?
- Which motors can be used with screw jacks?
Accessories
- Which accessories and safety components are available?
- Which lubricant is the right one and how is it applied?
- Are there differences in the service life of mineral greases?
- How can spindle force be positively influenced by lubrication?
- How can the spindle of the standing version S be secured against rotation?
- How do limit switches work on screw jacks?
- How does a handwheel work on a screw jack?
- How is a forked end used on screw jacks?
- What does a protective tube protect in a screw jack?
- What is a safety nut in screw jacks?
- What is the function of an opposed bearing plate in a screw jack?
- What is the function of the flange nut in a screw jack?
- What is the maximum tilt angle of the self-aligning nut in a screw jack?
- What is the purpose of a load damper in electromechanical drives?
- What role do connecting ends play in actuators?
- What role do lubricants play in screw jacks and actuators?
- What should be considered when adjusting and fixing flanges and rod ends?
- What should be considered when installing bellows on a screw jack?
- What should be considered when selecting screw jack accessories?
- When is a pivot bearing console used on actuators?
- Where are spiral springs used in screw jack drives?
- Which components are included in a screw jack system?
- Why is a bellows used on screw jacks?
Production according to drawing
- Are plastic gears an option at ZIMM?
- Does ZIMM also offer worm gear components?
- In which module range does ZIMM cut gears and what advantages does this offer the customer?
- Up to which diameters can spur gears be manufactured?
- What advantages does steel offer for customized drive elements?
- What are the advantages of galvanising in drive elements?
- What is meant by grinding in metalworking?
- What is the advantage of grinding compared to turning or milling?
- What is the advantage of hardening in customised drive elements?
- What is the benefit of burnishing for custom-made drive elements?
- What is the purpose of annealing in the customised manufacturing of drive elements?
- What sets ZIMM apart from other providers?
- When does ZIMM recommend aluminum for customized components?
- When does ZIMM recommend electroless nickel plating for custom-made drive elements?
- When is surface grinding worthwhile?
- Which drive elements does ZIMM manufacture according to drawings?
- Which grinding processes does ZIMM offer?
- Which heat treatments does ZIMM offer?
- Which materials does ZIMM process?
- Which surface protection processes are available for the manufacturing of customised drive elements?
- Which thread types does ZIMM manufacture?
- Which types of bevel gears does ZIMM manufacture?
- Why are heat treatments important for custom drive elements?
- Why does ZIMM often use bronze for customized worm gears?
- Why does ZIMM use teniferating for highly loaded drive elements?
- Why is material selection so crucial in production according to drawings?
- Why is the grinding of gears so important?
- Why tempering instead of just hardening?
Casting, series production and mechanical processing
- How does ZIMM ensure quality?
- How large can aluminium and steel parts be at ZIMM?
- How precisely does ZIMM manufacture turned and milled parts?
- In which industries are ZIMM components used?
- What advantage do customers gain from complete solutions at ZIMM?
- What are the advantages of anodising?
- What are the advantages of CNC-manufactured components from ZIMM?
- What are the advantages of galvanising?
- What are the advantages of nickel plating?
- What dimensions are possible for turned and milled parts?
- What does galvanising mean?
- What is electroless nickel plating?
- What is meant by anodising?
- What is powder coating?
- What makes forged parts from ZIMM special?
- When are steel parts the better choice?
- When does ZIMM recommend aluminium parts?
- When does ZIMM recommend nickel plating?
- Which casting qualities does ZIMM process?
- Which components does ZIMM manufacture most frequently?
- Which galvanising methods does ZIMM use?
- Which inspection reports does ZIMM provide?
- Which services does ZIMM offer in the field of precision casting and machining?
- Which surface treatments does ZIMM use?
- Which typical cast and forged parts does ZIMM manufacture?
- Why choose ZIMM for precision casting and CNC machining?
- Why is surface quality so important?
- Why is ZIMM a strong partner in mechanical and plant engineering?
- Why powder coating instead of painting?